logo
 

  How to Measure Roman Blinds:

Step 1.
Check that there are no central heating pipes, door handles or window latches and other obstacles in the way.

Step 2.
Will the product be installed inside the recess or outside the recess?

If the product is to be hung inside the recess:
Measure the width of the frame both at the top and the bottom. Measure the length of the frame both left and right. Order the smallest measured width and height sizes (in mm). We will deduct 10-12mm from the width given to ensure the blind will operate freely in the recess.

If the product is to be hung outside the recess
Measure the width and the drop of you window. We advise to overlap the window by 75mm on each side to the width and 75mm to the drop for efficient light control. Ensure there is enough space to add the overlap and all obstructions are taken into considerations (ie window sills, wardrobes, doors).

Step 3.
When ordering a Roman Shade, take into account the bundle height ranging from 25 cm up to 40 cm (depending on the size of the ordered blind) with respect to opening/closing the door or window.

 
N.B
If the blinds you are ordering go in the same room please contact our Customer Service department via the contact page after placing the order to advise and we will pattern match your blinds.

An international shrink tolerance of 2% to 3% applies on fabric for Roman and Austrian blinds. Polyester will shrink the least.

Not suitable for damp areas.