Installation instructions for Wood Blinds

Please read the following installation and operation instructions carefully as we do not accept to be held responsible for productions that have not been installed and operated properly.

All wood products have variation in tone and grain.

Before installing your blinds please make sure that they do not hit into any handles or obstructions and that they can be freely operated.

Please note that the cords that are used to operate the blind will be wrapped around the blind inside the packaging. When removing the protective bubble wrap using a cutting tool, please make sure you only cut into the bubble wrap, as you might accidentally cut the cords as well.

Mounting Hardware

2 mounting brackets marked RH and LH

2 pelmet clips which are preattached to the pelmet

centre supports for blinds exceeding 1200 mm in width

2 pelmet return clips which are preattached to the pelmet returns (optional)

Please note the weight of the blind must sit on centre support brackets, start installation with centre supports and only after locate end brackets.

2 plastic end caps (for blinds exceeding 1200 mm in width)

2 cord cleats